Top Tips For Installing A Stainless Steel Wire Balustrade

stainless balustrade

For many people, their outside space is almost as important as their indoor space. Therefore, it is essential that this space feels safe and secure. One of the best ways of making sure your garden is safe is by simply installing a stainless steel wire balustrade.

Although this sounds like a challenging and time consuming task, it doesn’t have to be. It is actually quite easy to put up one of these fences. Keep reading for some top tips for installing a stainless steel wire balustrade.

 

Step 1:

The first thing you need to take into consideration before assembling a stainless steel wire balustrade on your property is if it complies with the Australian safety regulations. Lots of Aussies are unaware that there are even safety standards for this kind of installation, and therefore have no idea what they actually are. It is important to note that the specific standards that you need to meet will depend on your location. If you are unsure of these rules, it is recommended that you check with your local council. After you have found out what safety regulations you need to keep in mind, you can begin.

 

Step 2:

Having the right tools for the job always makes things easier, and there are several tools that you will need in order to assemble your stainless steel wire balustrade. The tools you need for the process are:

  • Spirit level
  • Drill
  • Hacksaw
  • String line
  • Pencil

All of these tools are easy and cheap to buy from your local DIY shop, and you may even have most of them at home already. It will slow down the installation if you don’t have them to hand, so it is best to make sure that you have everything before you start.

 

Step 3:

Once you are properly prepared, you can start installing your stainless steel wire balustrade. The first part of this process is to find out how many panels are needed to fully surround the desired area. After determining this, it is recommended that you mark the position of each post and start to measure and adjust the length of the railings. As soon as you are certain how long each piece needs to be, you can cut the rails to the needed length.

It is important to note that if you are attaching any posts to a wall, you will need to use a top rail bracket to secure them.

 

Step 4:

How you begin installing your stainless steel wire balustrade will have a huge impact on how sturdy and durable it is. The simple fact is that beginning the process is the hardest part and it is the most important part to get right. If any of the posts are unstable or wonky, the rest of the railing will be as well.

It can sometimes be hard to know exactly where to start and which post should go in first. A good tip for this is to start at one end, by attaching it to a wall. If you are dealing with an outdoor area that does not have a wall, put up and end post.

 

Step 5:

After you have correctly installed the first panel, the rest should me much easier. Although brands differ in terms of how their railings are assembled, there should be specific instructions if you are struggling. However, most fences will slot together easily.

Once you have slotted two sections together, you will need to fix them in place and make sure they are sturdy. The best way of doing so is by using tek screws; be sure that the fence is tightly secured in place and properly attached to the section next to it. As you continue with the process of adding each panel and attaching with tek screws, make sure it is all straight and level by using a spirit level.

Continue with this process until you have surrounded the entire area.

 

Step 6:

Once you have surrounded the entire area, you will need to make sure each post is secured to the floor. This is to ensure that the stainless steel wire balustrade wont fall over. It is important to keep in mind that the type of outside flooring you have will impact how you do this. However, the instructions should give you detailed instructions on how to do this for each flooring type.